no learning
Use this command to reset learning on a particular AC-interface to the global learning configuration.
Command Syntax
no learning
Parameter
None
Default
By default, no learning is disabled
Command Mode
Interface VPLS mode and VPLS mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth0
(config-if)#mpls-vpls vpls1 service-template st1
(config-if-vpls)#no learning
(config-if-vpls)#exit
(config)#
#configure terminal
(config)#mpls vpls vpls5 vlan 34
(config-vpls)#learning limit 500
(config-vpls)#exit
(config)#
Last modified date: 10/17/2023