split-horizon (service-template)
Use this command to configure split-horizon group for vpls attachment circuit.
Use the no form of this command to remove split-horizon group from vpls attachment circuit.
Command Syntax
split-horizon group (network | access1 | access2)
no split-horizon group
Parameters
network
Split-horizon group name network
access1
Split-horizon group name access1
access2
Split-horizon group name access2
Default
By default, split horizon is disabled.
Command Mode
Interface VPLS mode
Applicability
This command was introduced before OcNOS-SP version 6.3 and applicable only on Qumran1 devices.
Examples
#configure terminal
(config)#interface xe1
(config-if)#switchport
(config-if)#mpls-vpls vpls1 service-template vc1
(config-if-vpls)#split-horizon group access1
(config-if-vpls)#no split-horizon group
Last modified date: 10/17/2023