static-mac
Use this command to add static MAC address to attachment circuit specific for a VPLS instance.
Use the no parameter with this command to remove static MAC address.
Note: It is not supported, if the user configures same mac address on different attachment circuits for same VPLS instance.
Command Syntax
static-mac XXXX.XXXX.XXXX
no static-mac XXXX.XXXX.XXXX
Parameter
XXXX.XXXX.XXXX
MAC address in HHHH.HHHH.HHHH format.
Default
By default, mac is disabled
Command Mode
Interface VPLS
Applicability
This command was introduced before OcNOS-SP version 4.2.
Examples
(config)#interface ce11/2
(config-if)#mpls-vpls vpls2 service-template vc1
(config-if-vpls)#static-mac 0000.0400.0602
Last modified date: 10/17/2023