vpls-ac-group
Use this command to assign an Attachment Circuit (AC) group to VPLS.
Use the no parameter with this command to remove an AC group.
Command Syntax
vpls-ac-group GROUPNAME
no vpls-ac-group
Parameter
GROUPNAME
Enter a name for the AC group
Default
By default, vpls ac group is disabled
Command Mode
VPLS mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#mpls vpls test 12
(config-vpls)#vpls-ac-group new-ac
(config-vpls)#no vpls-ac-group
Last modified date: 10/17/2023