igmp snooping report-suppression
Use this command to enable report suppression for IGMP version 1, 2 and 3 reports.
Use the no parameter with this command to disable report suppression.
Note: IGMP snooping report suppression is not supported on Qumran devices.
Command Syntax
igmp snooping report-suppression (disable|enable)
no igmp snooping report-suppression
Default
By default, report suppression is enabled on x86.
Parameters
None
Command Mode
Interface mode for VLAN interface.
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface vlan1.1
(config-if)#igmp snooping report-suppression enable
Last modified date: 10/20/2023