ipv6 multicast-routing
Use this command to turn on/off multicast routing on the router; when turned off, the multicast protocol daemon remains present, but does not perform multicast functions. When multicast routing is enabled, the MRIB re-creates tunnels, and starts processing any VIF addition/deletion requests, MRT addition/deletion requests, and any multicast forwarding events.
Use the no parameter with this command to disable this function. When the no parameter is used, the MRIB releases all VIFs and tunnels, cleans up MRTs, stops IGMPv2 operation and stops relaying multicast forwarder events to multicast protocols.
Command Syntax
ipv6 multicast-routing
ipv6 multicast-routing (vrf NAME|)
no ipv6 multicast-routing
no ipv6 multicast-routing (vrf NAME|)
Parameter
vrf
Specify the VRF name.
Default
By default, multicast routing is disabled.
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 6.2.0.
Example
#configure terminal
(config)#ipv6 multicast-routing
Last modified date: 10/20/2023