OcNOS-SP : Multicast Guide : Multicast Command Reference : IPv6 Multicast Commands : show debugging ipv6 mrib
show debugging ipv6 mrib
Use this command to display IPv6 multicast debugging information.
Command Syntax
show debugging ipv6 mrib
show debugging ipv6 mrib (vrf NAME|)
Parameters
vrf
Display routes from a VPN Routing/Forwarding instance.
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 6.2.0.
Examples
The following is a sample output of the show debugging ipv6 mrib command.
#show debugging ipv6 mrib
MRIBv6 debugging status:
MRIBv6 event debugging is on
MRIBv6 route debugging is on
Last modified date: 10/20/2023