show ipv6 mif
Use this command to display the MRIB VIF table entries.
The Virtual Host Interface (VIF) used in Pragmatic General Multicast (PGM) or “Reliable Multicast.” The VIF enables the router to send and receive IP multicast packets on several different interfaces at once, as dictated by the multicast routing tables on the router.
Command Syntax
show ipv6 mif
show ipv6 mif IFNAME
show ipv6 mif (vrf NAME|)
show ipv6 mif (vrf NAME|) IFNAME
Parameters
IFNAME
Specify the interface name.
vrf
Specify the VRF name.
Command Mode
Exec and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 6.2.0.
Example
The following are sample outputs of this command displaying the contents for the MRIB VIF table, both with and without the interface parameter specified:
#show ipv6 mif
Interface Mif Owner TTL Uptime
Idx Module
ce9 0 PIM 1 00:00:04
Register 1 PIM 1 00:00:04
ce10 2 PIM 1 00:00:04
Last modified date: 10/20/2023