OcNOS-SP : Multicast Guide : Multicast Command Reference : Layer 3 MLD Multicast Commands : ipv6 mld ssm-map enable
ipv6 mld ssm-map enable
Use this command to enable SSM mapping on the router. This command applies to interfaces configured for MLD Layer-3 multicast protocols, or MLD Proxy.
Use the no parameter with this command to disable SSM mapping.
Command Syntax
ipv6 mld ssm-map enable
ipv6 mld (vrf NAME|) ssm-map enable
no ipv6 mld ssm-map enable
no ipv6 mld (vrf NAME|) ssm-map enable
Parameter
vrf
Specify the VRF name.
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 6.2.0.
Example
This example shows how to enable MLD SSM mapping on the router.
#configure terminal
(config)#ipv6 mld ssm-map enable
Last modified date: 10/20/2023