ipv6 mld version
Use this command to set the current MLD protocol version on an interface. This command applies to interfaces configured for MLD Layer-3 multicast protocols, or MLD Proxy.
Use the no parameter with this command to return to the default version on an interface.
Command Syntax
ipv6 mld version <1-2>
no ipv6 mld version
Parameter
<1-2>
Specify a MLD protocol version number.
Default
Default MLD protocol version number is 2.
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 6.2.0.
Example
#configure terminal
(config)#interface 0
(config-if)#ipv6 mld version 1
Last modified date: 10/20/2023