ip multicast bidirectional enable
Data Plane may require specific resource allocations for enabling multipoint to multipoint (bidirectional) multicast data forwarding.
Use this command to configure data plane for such resource allocation.
Use the no form of this command to revert this configuration.
Dependent on feature VLAN classifier, multicast bidirectional and VLAN classifier are dependent on same hardware resource so they are made mutually exclusive. Disable VLAN classifier to enable this feature.
Command Syntax
ip multicast bidirectional enable
no ip multicast bidirectional enable
Parameters
None
Default
By default, bidirectional forwarding is disabled.
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 4.0.
Examples
#configure terminal
(config)#ip multicast bidirectional enable
Last modified date: 10/20/2023