show debugging ip mrib
Use this command to display IPv4 multicast debugging information.
Command Syntax
show debugging ip mrib
show debugging ip mrib (vrf NAME|)
Parameters
vrf
Display routes from a VPN Routing/Forwarding instance.
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
The following is a sample output of the show debugging ip mrib command.
#show debugging ip mrib
Debugging status:
MRIBv4 event debugging is on
MRIBv4 VIF debugging is on
MRIBv4 route debugging is on
MRIBv4 route statistics debugging is on
MRIBv4 FIB message debugging is on
MRIBv4 PIM Register message debugging is on
MRIBv4 NSM IPC message debugging is on
MRIBv4 MRIB IPC message debugging is on
MRIBv4 traceroute debugging is on
MRIBv4 traceroute detailed debugging is on
#
Last modified date: 10/20/2023