ip igmp robustness-variable
Use this command to set the robustness variable value on an interface. This command applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.
To return to the default value on an interface, use the no parameter with this command.
Command Syntax
ip igmp robustness-variable <2-7>
no ip igmp robustness-variable
Parameter
<2-7>
Specify the robustness variable value.
Default
Default robustness variable value is 2.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface 0
(config-if)#ip igmp robustness-variable 3
Last modified date: 10/20/2023