ip igmp startup-query-count
Use this command to set a startup query count for IGMP.
Use the no parameter with this command to return to the default version.
Command Syntax
ip igmp startup-query-count <2-10>
no ip igmp startup-query-count
Parameters
<2-10>
Specify a startup query count value.
Default
The default value 2.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface 0
(config-if)#ip igmp startup-query-count 2
(config-if)#no ip igmp startup-query-count
Last modified date: 10/20/2023