ip igmp version
Use this command to set the current IGMP protocol version on an interface. This command applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.
Use the no parameter with this command to return to the default version.
Command Syntax
ip igmp version <1-3>
no ip igmp version
Parameters
<1-3>
Specify IGMP protocol version number.
Default
The default IGMP protocol version number is 3.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface 0
(config-if)#ip igmp version 2
Last modified date: 10/20/2023