OcNOS-SP : Layer 3 Guide : Neighbor Discovery Command Reference : Neighbor Discovery Commands : ip proxy-arp
ip proxy-arp
Use this command to enable the proxy ARP feature.
Use the no parameter to disable the proxy ARP feature.
Command Syntax
ip proxy-arp
no ip proxy-arp
Parameter
None
Default value
No default value is specified
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface xe1
(config-if)#ip proxy-arp
(config-if)#no ip proxy-arp
 
Last modified date: 10/16/2023