nd-reachable-time
Use this command to set neighbor reachable time value.
Use no form of this command to set the reachable time to its default value.
Command Syntax
nd-reachable-time <10-3600>
no nd-reachable-time
Parameter
<10-3600>
ND reachable time in seconds.
Default value
By default, nd-reachable-time is 60 seconds
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface xe1
(config-if)#nd-reachable-time 300
(config-if)#no nd-reachable-time
Last modified date: 10/16/2023