OcNOS-SP : Layer 3 Guide : Open Shortest Path First Command Reference : OSPFv2 Commands : ip ospf bfd
ip ospf bfd
Use this command to enable Bidirectional Forwarding Detection (BFD).
Use this command with either the no or disable parameter to disable BFD.
Command Syntax
ip ospf bfd (disable|)
no ip ospf bfd (disable|)
Parameters
disable
Specify to disable BFD.
Default
By default, ip ospf bfd is disabled
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface eth0
(config-if)#ip ospf bfd
Last modified date: 10/16/2023