ospf area-interface-config-mode
Use this command to attach the interface to the router OSPF area. When this is enabled, any existing configuration of router ospf attached to the interface is erased.
Use no form of this command to disable. When this is disabled, any existing configuration of interface attached to the router ospf is erased.
Command Syntax
ospf area-interface-config-mode
no ospf area-interface-config-mode
Parameters
None
Default
None
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 4.2.
Examples
#configure terminal
(config)#ospf area-interface-config-mode
Last modified date: 10/16/2023