OcNOS-SP : Layer 3 Guide : Open Shortest Path First Command Reference : OSPFv3 Commands : debug ipv6 ospf
debug ipv6 ospf
Use this command to specify all debugging options for OSPFv3.
Use the no form of this command to disable the options.
Command Syntax
debug ipv6 ospf (all|bfd|events|ifsm|lsa|nfsm|nsm|packet|retransmission|rib|route|)
 
no debug ipv6 ospf (all|bfd|events|ifsm|lsa|nfsm|nsm|packet|retransmission|rib|route|)
undebug ipv6 ospf (all|bfd|events|ifsm|lsa|nfsm|nsm|packet|rib|route)
no debug all ipv6 ospf
undebug all ipv6 ospf
no debug all
undebug all
Parameters
all
Enables all debugging information.
bfd
Debug OSPFv3 Bidirectional Forwarding Detection. (see debug ipv6 ospf bfd)
events
Debug OSPFv3 events (see debug ipv6 ospf events).
ifsm
Debug OSPFv3 Interface State Machines (see debug ipv6 ospf ifsm).
lsa
Debug OSPFv3 Link State Advertisements (see debug ipv6 ospf lsa).
nfsm
Debug OSPFv3 Neighbor State Machines (see debug ipv6 ospf nfsm).
nsm
Debug OSPFv3 NSM information (see debug ipv6 ospf nsm).
packet
Debug OSPFv3 packets (see debug ipv6 ospf packet).
retransmission
Debug OSPFv3 retransmission information. (see debug ipv6 ospf retransmission)
rib
Debug OSPFv3 Routing Information Base.(see debug ipv6 ospf rib)
route
Debug OSPFv3 route information (see debug ipv6 ospf route).
Command Mode
Privileged Exec and Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#debug ipv6 ospf all
Last modified date: 10/16/2023