OcNOS-SP : Segment Routing Guide : Path Computation Element Communication Protocol Command Reference : Egress Peer Engineering Commands : egress-engineering
egress-engineering
Use this command to enable EPE for the default BGP routing instance and change the mode to EPE configure mode.
Command Syntax
egress-engineering
no egress-engineering
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
R1(config)#router bgp 200
R1(config-router)#egress-engineering
R1(config-router-epe)
 
R1(config-router)#no egress-engineering
Last modified date: 10/20/2023