keepalive
Use this command to set the local keepalive interval.
Use the no form of this command to set the keepalive interval to its default (30 seconds).
Command Syntax
keepalive <0-255>
no keepalive
Parameters
<0-255>
Keepalive interval in seconds. The default value is 30 seconds.
Default
30 seconds
Command Mode
PCEP mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#pce configuration 127
(config-pcep)#keepalive 200
Last modified date: 10/20/2023