OcNOS-SP : Segment Routing Guide : Path Computation Element Communication Protocol Command Reference : PCEP Commands : pce init-lsp-limit
pce init-lsp-limit
Use this command to set the number of PCE initiate messages that a PCC can process.
Use the no form of the command to set the number of PCE initiate messages to its default value (1048575 initiate messages).
Command Syntax
pce init-lsp-limit <1-1048575>
no pce init-lsp-limit
Parameters
<1-1048575>
Number of PCE initiate messages that a PCC can process. The default is 1048575 initiate messages.
Default
1048575 initiate messages
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#pce init-lsp-limit 7777
 
Last modified date: 10/20/2023