OcNOS-SP : Segment Routing Guide : Path Computation Element Communication Protocol Command Reference : PCEP Commands : tolerance keepalive
tolerance keepalive
Use this command to set the tolerance keepalive interval.
Use the no form of this command to set the tolerance keepalive interval to its default (0 seconds).
command syntax
tolerance keepalive <1-255>
no tolerance keepalive
Parameters
<1-255>
Tolerance keepalive interval. The default is 0 seconds.
Default
0 seconds
Command Mode
PCEP mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#pce configuration 127
(config-pcep)#tolerance keepalive 50
Last modified date: 10/20/2023