OcNOS-SP : Segment Routing Guide : Path Computation Element Communication Protocol Command Reference : PCEP Segment-Routing Commands : pce state-report
pce state-report
Use this command to enable sending a PCEP state report.
Use the no form of this command to disable sending a PCEP state report.
Syntax
pce state-report
no pce state-report
Parameters
None
Default
Sending a PCEP state report is disabled.
Command Mode
RSVP trunk mode
Segment routing policy mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#segment-routing
(config-sr)#traffic-engineering
(config-sr-te)#policy P1
(config-sr-pol)#pce state-report
 
#configure terminal
(config)#rsvp-trunk T1 ipv4
(config-trunk)#pce state-report
 
Last modified date: 10/20/2023