OcNOS-SP : Segment Routing Guide : Path Computation Element Communication Protocol Command Reference : PCEP Segment-Routing Commands : segment-routing pcep
segment-routing pcep
Use this command to enable segment routing for PCE.
Use the no form of this command to disable the segment-routing.
Command Syntax
segment-routing pcep
no segment-routing pcep
Parameters
None
Command Mode
PCEP mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#pce configuration 1
(config-pcep)#capability
(config-pcep-cap)#segment-routing pcep
Last modified date: 10/20/2023