ip pim bidir-neighbor-filter
Use this command to specify which BIDIR neighbors to be considered in DF election.
Use the no form of this command to allow all BIDIR neighbors to take place in DF election.
Command Syntax
ip pim bidir-neighbor-filter WORD
no ip pim bidir-neighbor-filter
Parameters
WORD
Name of an BIDIR peering filter
Default
None
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 4.0.
Examples
#configure terminal
(config)#interface eth1
(config-if)#ip pim bidir-neighbor-filter acl1
(config-if)#no ip pim bidir-neighbor-filter
Last modified date: 10/20/2023