ip pim jp-timer
Use this command to set a PIM join/prune timer.
Use the no option with this command to remove the join/prune timer.
Command Syntax
ip pim (vrf NAME|) jp-timer <1-65535>
no ip pim (vrf NAME|) jp-timer
Parameters
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
<1-65535>
Range of values for the Join/Prune timer, in seconds
Default
The ip pim jp-timer default value is 60 seconds.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#ip pim jp-timer 234
#configure terminal
(config)#no ip pim jp-timer
Last modified date: 10/20/2023