ip pim register-rp-reachability
Use this command to enable the RP reachability check for PIM Registers at the DR.
Use the no option to reset to disable the RP reachability check for PIM Registers at the DR.
Command Syntax
ip pim (vrf NAME|) register-rp-reachability (disable|enable)
no ip pim (vrf NAME|) register-rp-reachability
Parameter
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
Default
The default setting is checking for rendezvous point reachability,
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#ip pim register-rp-reachability disable
(config)#no ip register-rp-reachability
(config)#commit
Last modified date: 10/20/2023