ip pim rp-register-kat
Use this command to configure a Keepalive Timer (KAT) value for (S,G) states at RP to monitor PIM register packets, overriding the generic KAT timer value.
Use the no option to remove this configuration.
Command Syntax
ip pim rp-register-kat <1-65535>
ip pim (vrf NAME|) rp-register-kat <1-65535>
no ip pim rp-register-kat
no ip pim (vrf NAME|) rp-register-kat
Parameters
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
<1-65535>
Range of values for a KAT time in seconds
Default
The ip pim rp-register-kat default is 60 seconds.
Command mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#ip pim rp-register-kat 3454
(config)#no ip pim rp-register-kat
Last modified date: 10/20/2023