OcNOS-SP : Multicast Guide : Protocol Independent Multicasting Command Reference : PIMv4 Commands : show ip pim bsr-router
show ip pim bsr-router
Use this command to show the bootstrap router PIMv2 address.
Command Syntax
show ip pim bsr-router
show ip pim (vrf NAME|) bsr-router
Parameters
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
Command Mode
Privileged Exec and Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#show ip pim bsr-router
PIMv2 Bootstrap information
BSR address: 10.10.11.35 (?)
Uptime: 00:00:38, BSR Priority: 0, Hash mask length: 10
Expires: 00:01:32
Role: Non-candidate BSR
State: Accept Preferred
 
#show ip pim bsr-router
PIMv2 Bootstrap information
BSR address: 20.0.1.21
Uptime: 00:40:20, BSR Priority: 64, Hash mask length: 10
Expires: 00:02:07
Role: Candidate BSR
State: Candidate BSR
 
Table 1-23: Show ip pim bsr-router output 
Entry
Description
BSR address
Bootstrap Router’s IP address.
Uptime
As stated
BSR Priority
BSR election priority; can be set manually, but default is 64.
Hash mask length
As stated.
Expires
Group-to-C-RP mapping Expiry Timer.
Role
Specifies whether the BSR is the Candidate BSR or a Non-candidate BSR
State
• The current state of a Candidate BSR, one of the following: Candidate-BSR, Pending-BSR, or Elected-BSR.
• The current state of a Non-candidate BSR, one of the following: Accept Any or Accept Preferred.
 
 
Last modified date: 10/20/2023