OcNOS-SP : Multicast Guide : Protocol Independent Multicasting Command Reference : PIMv4 Commands : show ip pim rp mapping
show ip pim rp mapping
Use this command to show group-to-RP (rendezvous point) mappings, and the RP set.
Command Syntax
show ip pim rp mapping
show ip pim (vrf NAME|) rp mapping
Parameter
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
Command Mode
Privileged Exec mode and Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ip pim rp mapping
This system is the Bootstrap Router (v2)
Group(s): 224.0.0.0/4
RP: 10.10.1.5
Info source: 172.16.1.2, via bootstrap, priority 192
Uptime: 00:00:13, expires: 00:02:29
RP: 172.16.1.2
Info source: 172.16.1.2, via bootstrap, priority 2
Uptime: 00:34:42, expires: 00:01:49
 
Table 1-26: Show ip PIM rp mapping output
Entry
Description
Identity declaration
This system is the Bootstrap Router (PIM version number v1, v2. or, v3) or not the Bootstrap Router.
Group(s):
The Multicast address of this multicast Group.
RP
Addresses of the Rendezvous Points.
Info source:
Address of the info source, whether it was learned from the Bootstrap Router, and the configured priority.
Last modified date: 10/20/2023