OcNOS-SP : Multicast Guide : Protocol Independent Multicasting Command Reference : PIMv6 Commands : debug ipv6 pim timer bsr
debug ipv6 pim timer bsr
Use this command to enable debugging of the PIM BSR time.
Use the no option with this command to disable debugging of the PIM BSR timer.
Command Syntax
debug ipv6 pim timer bsr
debug ipv6 pim timer bsr bst
debug ipv6 pim timer bsr crp
debug ipv6 pim (vrf NAME|) timer bsr
debug ipv6 pim (vrf NAME|) timer bsr bst
debug ipv6 pim (vrf NAME|) timer bsr crp
no debug ipv6 pim timer bsr
no debug ipv6 pim timer bsr bst
no debug ipv6 pim timer bsr crp
no debug ipv6 pim (vrf NAME|) timer bsr
no debug ipv6 pim (vrf NAME|) timer bsr bst
no debug ipv6 pim (vrf NAME|) timer bsr crp
Parameters
bst
Turn on or turn off the bootstrap debugging timer
crp
Turn on or turn off the Candidate-RP debugging timer
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
Command Mode
Exec mode, Privileged Exec mode, and Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#debug ipv6 pim timer bsr bst
Last modified date: 10/20/2023