debug ipv6 pim timer hello
Use this command to enable debugging of various PIM Hello timers.
Use the no option with this command to disable debugging of the PIM Hello timers.
Command Syntax
debug ipv6 pim timer hello
debug ipv6 pim timer hello ht
debug ipv6 pim timer hello nlt
debug ipv6 pim timer hello tht
debug ipv6 pim (vrf NAME|) timer hello
debug ipv6 pim (vrf NAME|) timer hello ht
debug ipv6 pim (vrf NAME|) timer hello nlt
debug ipv6 pim (vrf NAME|) timer hello tht
no debug ipv6 pim timer hello
no debug ipv6 pim timer hello ht
no debug ipv6 pim timer hello nlt
no debug ipv6 pim timer hello tht
no debug ipv6 pim (vrf NAME|) timer hello
no debug ipv6 pim (vrf NAME|) timer hello ht
no debug ipv6 pim (vrf NAME|) timer hello nlt
no debug ipv6 pim (vrf NAME|) timer hello tht
Parameters
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
ht
Turn on or turn off the PIM Hello debugging timer (ht)
nlt
Turn on or turn off the PIM Neighbor Liveliness debugging timer (nlt)
tht
Turn on or turn off the Triggered Hello Timer (tht)
Command Mode
Exec mode, Privileged Exec mode, and Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#debug ipv6 pim timer hello ht
Last modified date: 10/20/2023