ipv6 pim propagation-delay
Use this command to configure the propagation delay value.
Use the no option with this command to return the propagation delay to its default value.
Command Syntax
ipv6 pim propagation-delay <0-32767>
no ipv6 pim propagation-delay
Parameter
<0-32767>
Range of values for propagation delay, in milliseconds
Default
The default propagation delay is 1000 milliseconds.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface eth0
(config-if)#ipv6 pim propagation-delay 1000
(config)#interface eth0
(config-if)#no ipv6 pim propagation-delay
Last modified date: 10/20/2023