ipv6 pim register-rp-reachability
Use this command to enable/disable the RP reachability check for PIM Registers at the DR.
Use the no option to reset to the default state.
Command Syntax
ipv6 pim (vrf NAME|) register-rp-reachability (disable|enable)
no ipv6 pim (vrf NAME|) register-rp-reachability
Parameter
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
Command Mode
Configure mode
Default
The default setting is no checking for rendezvous point reachability,
Applicability
This command was introduced before OcNOS version 1.3.
Example
(config)#ipv6 pim register-rp-reachability enable
(config)#commit
(config)#ipv6 pim register-rp-reachability disable
(config)#commit
(config)#no ipv6 pim register-rp-reachability
Last modified date: 10/20/2023