ipv6 pim register-suppression
Use this command to configure the register-suppression time, in seconds, overriding the default value of 60 seconds. Configuring this value modifies register-suppression time at the DR; configuring this value at the RP modifies the RP-keepalive-period value if the ipv6 pim rp-register-kat command is not used.
Use the no option to remove the register-suppression setting.
Command Syntax
ipv6 pim (vrf NAME|) register-suppression <11-65535>
no ipv6 pim (vrf NAME|) register-suppression
Parameters
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
<11-65535>
Register suppression time, in seconds
Command mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#ipv6 pim register-suppression 555
#configure terminal
(config)#no ipv6 pim register-suppression
Last modified date: 10/20/2023