ipv6 pim rp-register-kat
Use this command to configure a Keepalive Timer (KAT) value for (S,G) states at RP to monitor PIM register packets, overriding the generic KAT timer value.
Use the no option to remove this configuration.
Command Syntax
ipv6 pim rp-register-kat <1-65535>
ipv6 pim (vrf NAME|) rp-register-kat <1-65535>
no ipv6 pim rp-register-kat
no ipv6 pim (vrf NAME|) rp-register-kat
Parameters
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
<1-65535>
Range of values for a KAT time in seconds
Command mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#ipv6 pim rp-register-kat 3454
(config)#no ipv6 pim rp-register-kat
Last modified date: 10/20/2023