clock-accuracy
Use this command to indicate the expected accuracy of the clock.
Use the no form of this command in PTP Clock Mode to set the default value 254.
Use the no form of this command in PTP Clock Port Mode to set the default value 0x21.
Note: Applicable for Non-Ethernet ports for PTP Clock Port mode.
Command Syntax
clock-accuracy <0-255>
no clock-accuracy
Parameters
<0-255>
A number representing the expected clock accuracy.
Command Mode
PTP Clock Mode
PTP Clock Port Mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#clock-accuracy 10
(config-ptp-clk)#clock-port 1
(config-clk-port)#clock-accuracy 15
Last modified date: 10/20/2023