number-ports
Use this command to set the number of PTP ports on the instance. If the number of ports is larger than one, the clock is configured as a boundary clock, otherwise it's an ordinary clock.
Use the no form of this command to set default value 1.
Command Syntax
number-ports <1-31>
no number-ports
Parameters
<1-31>
Number of PTP ports on this instance.
Command Mode
PTP Clock Mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#number-ports 3
Last modified date: 10/20/2023