primary llsp
Use this command to configure a primary Differentiated Services Label-Only-Inferred-PSC (Diff-Serv L-LSP) interface, which will use Diff-Serv Class as its PHB Scheduling Class (PSC).
Use the no parameter with this command to remove the Diff-Serv L-LSP configuration.
Command Syntax
primary llsp CLASS
no primary llsp
Parameters
CLASS<0-7>
Diffserv class alias. e.g: be, ef, af11, etc.
Default
By default, primary llsp is disabled
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
This command is not available on QUMRAN devices.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary llsp cs4
(config)#rsvp-trunk T1
(config-trunk)#no primary llsp
Last modified date: 10/17/2023