secondary elsp-signaled
Use this command to configure a secondary Diff-Serv (Differentiated Services) explicitly signaled E-LSP (EXP-Inferred-PSC LSP) interface. The classes 1 to 7 are optional parameters can be selected from the node level PHB-EXP (Per-Hop Behavior) mapping as PHBs. They will then be used for an E-LSP. If you do not specify a class with this command, all classes will be selected for the E-LSP.
Use the no parameter with this command to remove the configuration.
Command Syntax
secondary elsp-signaled
secondary elsp-signaled CLASS1
secondary elsp-signaled CLASS1 CLASS2
secondary elsp-signaled CLASS1 CLASS2 CLASS3
secondary elsp-signaled CLASS1 CLASS2 CLASS3 CLASS4
secondary elsp-signaled CLASS1 CLASS2 CLASS3 CLASS4 CLASS5
secondary elsp-signaled CLASS1 CLASS2 CLASS3 CLASS4 CLASS5 CLASS6
secondary elsp-signaled CLASS1 CLASS2 CLASS3 CLASS4 CLASS5 CLASS6 CLASS7
no secondary elsp-signaled
Parameters
CLASS<0-7>
Diffserv class alias. e.g: be, ef, af11, etc.
Default
By default, secondary elsp signaled is disabled
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#secondary elsp-signaled class cs3 cs6 cs2 cs5
(config)#rsvp-trunk T1
(config-trunk)#no secondary elsp-signaled
Last modified date: 10/17/2023