path
Use this command to specify an RSVP path to be used. The PATHNAME in this command is the string (name) used to identify an RSVP path defined for the node (refer to rsvp-path command).
Use the no parameter with this command to remove a configured RSVP path.
Command Syntax
path PATHNAME
no path
Parameters
PATHNAME
The name of the path to use
Default
By default, bypass path is disabled
Command Mode
Bypass mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
#configure terminal
(config)#rsvp-bypass bp1
(config-bypass)#path mypath
Last modified date: 10/17/2023