primary fast-reroute hop-limit
Use this command to set the hop-limit for a detour LSP.
Note: This command helps identify attributes of the FRR backup LSP for the one-to-one protection method.
Use the no parameter with this command to unset the detour LSP hop-limit.
Command Syntax
primary fast-reroute hop-limit <1-255>
no primary fast-reroute hop-limit (<1-255>|)
Parameter
<1-255>
Set the number of hops
Default
By default, primary fast reroute hop limit is 255
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary fast-reroute hop-limit 25
Last modified date: 10/17/2023