primary fast-reroute protection
Use this command to create an Fast Reroute backup and to set an LSP one-to-one protection or facility backup mechanism.
Note: Traffic switching of less than 50ms is not applicable for unknown unicast traffic received on edge nodes for VPLS services.
Use the no parameter with this command to remove LSP protection mechanism.
Parameters
None
Command Syntax
primary fast-reroute protection (one-to-one|facility)
no primary fast-reroute protection (one-to-one|facility)
Parameters
one-to-one
One-to-one protection
facility
Facility backup (bypass) protection"
Default
By default, primary fast reroute protection is disabled
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary fast-reroute protection one-to-one
Last modified date: 10/17/2023