primary cspf-retry-limit
Use this command to specify the number of retries that CSPF should carry out for a request received from RSVP.
Use the no parameter with this command to disable this configuration.
Command Syntax
primary cspf-retry-limit <1-65535>
no primary cspf-retry-limit
Parameter
<1-65535>
Set the number of times CSPF should retry for this LSP
Default
By default, retry-limit is 0.
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#primary cspf-retry-limit 535
(config)#rsvp-trunk T1
(config-trunk)#no primary cspf-retry-limit
Last modified date: 10/17/2023