OcNOS-SP : Multi-Protocol Label Switching Guide : RSVP-TE Command Reference : RSVP-TE Commands : rsvp hello-receipt
rsvp hello-receipt
Use this command to enable the receipt of hello messages from peers connected through this interface. This is an interface-specific command and when not used, the global hello-receipt command applies.
Use the no parameter with this command to disable the exchange of hello messages for this interface.
Command Syntax
rsvp hello-receipt
no rsvp hello-receipt
Parameters
None
Default
By default, rsvp hello receipt is disabled
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth0
(config-if)#rsvp hello-receipt
Last modified date: 10/17/2023