rsvp-trunk force-switchover-secondary
Use this command to force switchover a secondary LSP. This command is recommended for limited use on a stable system when there is a need for software upgrade without traffic impact.
Note: This command is supported on secondary configured tunnels and not on multiple secondary configured tunnels.
Command Syntax
rsvp-trunk TRUNKNAME force-switchover-secondary (off|on)
Parameters
TRUNKNAME
Name of the trunk
force-switchover-secondary
(off|on)
Force switchover to secondary
Default
NA.
Command Mode
Execute mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#rsvp-trunk <Trunk-Name> force-switchover-secondary off
Last modified date: 10/17/2023