secondary cspf-retry-timer
Use this command to specify the time between each retry that CSPF might carry out for a request received from RSVP.
Use the no parameter with this command to remove this configuration.
Command Syntax
secondary cspf-retry-timer <1-600>
no secondary cspf-retry-timer
Parameters
<1-600>
Timeout between successive retries, in seconds
Default
By default, no retry-timer configuration is defined for CSPF calculations, so the value is set to 0.
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#secondary cspf-retry-timer 45
Last modified date: 10/17/2023