multipath-group
Use this command to configure a multipath group on the RSVP trunk. When multipath group is configured on the trunk, trunk will become member of multipath group.
Use the no parameter to remove multipath group from RSVP trunk.
Command Syntax
multipath-group GROUPNAME
no multipath-group
Parameter
GROUPNAME
Name of the multipath group
Default
By default, parameter is not configured.
Command Mode
Trunk mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#rsvp-trunk to_dest1
(config-trunk)# multipath-group mygroup
(config-trunk)# no multipath-group
Last modified date: 10/17/2023